PROCESSING OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.

Code: D947F260D10421  Price: 4,000   61 Pages     Chapter 1-5    6400 Views

PROCESSING OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.

 

ABSTRACT

The production of cassava flour by the method of traditional processing method (sun drying) and modern processing method (oven drying) was carried out using cassava sliced cubes or peeled cassava.

Indeed, the traditional Nigeria techniques of cassava flour production was studied with a view of achieving same product mechanically. Result of this studies show that the processing time can  be much reduced if mechanized.

The effects of variations in the processing parameters on the productions were discussed. It was also observed that the percentage of moisture was highest in the sun drying at 18% followed by oven drying at 9%, this was due to the fact that the higher the moisture content, the longer the drying time. Also, while the optimum drying temperature varied for sun drying but it was 800c for oven drying process used respectively.

Based on the work, the colour of sun dried sample was brighter compared with mechanized sample. It is therefore recommended that for good production of cassava flour with good flour mixture, appearance and taste, the flour should be enriched with protein and vitamin additive to increase the nutritional values, thus improving the health of millions of Nigerians whose consumption of cassava flour are high in the areas of bread baking.

TABLE OF CONTENTS

CHAPTER ONE

1.0              INTRODUCTION

1.1       Aims and objective of the research work

1.2              SCOPE OF PROJECT

1.3       LIMITATION

1.4       LITERATURE AND METHOD OF

PRODUCTION

1.5              Traditional method of cassava flour production

1.6              Modern method of cassava flour production

1.7              Oven drying method

1.8              Uses of cassava flour

1.9              Large scale purpose

1.9.1        Small scale purpose

1.9.2        Characterization of the flour products.

CHAPTER TWO

2.0       LITERATURE SURVEY/REVIEW

2.1              Cassava

2.2              Characteristics of cassava

2.3              Cassava growing

2.4              Culture

2.5              Importance of cassava

2.6              Utilization and production statistics

2.7              Reasons for drying in cassava flour

2.8              Classification of dryers

2.9              Batch drying

2.9.1    Continuous drying

CHAPTER THREE

2.0              MATERIALS AND EXPONENTIAL

PROCEDURES

3.1              Material / equipment used

3.2              Experimental procedures

3.3              Sun drying and oven drying method

3.4              Analytical procedure

3.5              Flow chart for sun drying method

3.6              Flow chart for oven drying method

3.7              Cyomide content determination

3.8              Moisture content determination

3.9              Determination of ash content

3.9.1        Protein content determination

3.9.2        Results

3.9.3        Results for oven drying at optimum temp.

3.9.4        Result / data analysis

3.9.5        Calculation for % moisture content (oven drying)

CHAPTER FOUR

4.0              DISCUSSION (SUN DRYING)

4.1              Establishing of optimum drying temperature

CHAPTER FIVE

5.0       CONCLUSION AND RECOMMENDATION

appendix:

1.                  Drying rate curve at optimum temp 800c (oven drying)

APPENDIX ii Moisture content determination

APPENDIX iii            Drying rate curve (sun drying)

APPENDIX IV          Determination of moisture content in sun drying

DIAGRAMS.

PROCESSING OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.


Terms of Use: This is an academic paper. Students should NOT copy our materials word to word, as we DO NOT encourage Plagiarism. Only use as a guide in developing your original research work. Thanks.

Disclaimer: All undertaking works, records, and reports posted on this website, eprojectguide.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not duplicate the work in exactly the same words (verbatim). eprojectguide.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, course hero, and numerous different stages where clients transfer works. The paid membership on eprojectguide.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348064699975 or send us a mail along with the web address linked to the work, to eprojectguide@gmail.com. We will answer to and honor each solicitation. Kindly note notification it might take up to 24 – 48 hours to handle your solicitation.

Material Information
  • ₦4,000.00 1 Price:
  • 61 2 No. of Pages:
  • 5 3 No. of Chapters:
  • No 4 Has Implementation:
FOR ENQUIRIES WE ARE AVAILABLE 24/7

Contact us on

DEPARTMENT
LAW