TABLE OF CONTENT
CHAPTER ONE
Introduction 1
Metal Shearing (Lit. Review) 2
Chapter Two
Component Parts of Bench Shearing Machine 4
Chapter Three
Theory and Analysis of Problem 11
Fabrication of Bench Shearing Machine (Sequence of Operation) 14
Strength of Component 15
Machine Mechanisms 16
Chapter Four
Cost Analysis 18
Test and Results 19
Maintenance (Precautions) 20
Inference 21
Recommendation (Observation) 21
Conclusion 22
CHAPTER ONE
INTRODUCTION
The production of bench shearing machine to deduce, and probably eliminate sufferings and most especially the need for technological break through and self reliance has been a major concern of the federal government .
Detail shearing and shaping has been a firing problem in the society from time old especially towards our loco – parenthesis. To help eradicate these problems this project write up his derived into simplicities and construction of bench shearing machine that can be used to cut up to 3mm sheet of mild steel with a treated blade made up of high carbon steel.
The machine is operated manually with a long handily know as its effort. The lengthiness of the handle helps it to increase output towards the work piece. The material to be cut must be low carbon material example mild steel, low carbon material dead mild steel or aluminum alloys.
Other things discussed in the thesis include the component parts of the bench shearing machine, design and construction.(sequence of operation) problems encountered and maintenance of the machine to help readers get used to the work done.
METAL SHEARING
LITERATURE REVIEW
Several countries which has made an impact towards technological break through started by cutting, shearing, filling and assembling metal parts inform of machine that can produce the desired component that is while a large portion of the training and skills of a workshop engineer is denoted to the shaping of metal and stopping the process at the proper time.
In the workshop most of the shaping involve shearing of metal sheets, usually the conception of shearing suggest shearing the substance apart with a chisel. It involves the shearing action by the use snipe for tin sheets.
There are four different types of shearing metal sheets in the workshop this include:
GULL TONE:-
This is a big machine that can cut long range of length in metal sheet which is normally powered by hydraulic or leg for less pressure. gull tone use in time sheets or paper gull tone.
Terms of Use: This is an academic paper. Students should NOT copy our materials word to word, as we DO NOT encourage Plagiarism. Only use as a guide in developing your original research work. Thanks.
Disclaimer: All undertaking works, records, and reports posted on this website, eprojectguide.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not duplicate the work in exactly the same words (verbatim). eprojectguide.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, course hero, and numerous different stages where clients transfer works. The paid membership on eprojectguide.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348064699975 or send us a mail along with the web address linked to the work, to eprojectguide@gmail.com. We will answer to and honor each solicitation. Kindly note notification it might take up to 24 – 48 hours to handle your solicitation.