ABSTRACT
The construction of the five (5) litre Electric Kettle was carried out in mechanical workshop of the Institute of Management and Technology Enugu. (I.M.T).
The fabrication process, included measuring and marking out operations of which the following dimensions was taken; the cylindrical body was taken as 170mm by 700mm in height and length respectively, the base diameter was 223mm, the lid diameter 140mm, length of nozzle 75min, water outlet and inlet were 20mm and 35mm, respectively and the drill position of the nozzle and heating element were 40mm and 25mm respectively.
The marked parts were cut out, filed for smooth edges, welded to form a drum like shape, insulating handle, cover and heating element were installed. At the end of the exercises, the electric kettle was fabricated.
The parent material used for the construction is the stainless steel, which was preferable for its easy workability, corrosion resistance and heat conductivity that is high. The stainless steel cannot contaminate food and drink.
The construction of electric kettle is recommended serve as heating equipment in our laboratory home, hospital etc. it also serves as a device which requires electricity conduction to generate heat to perfect its function. As well as in laboratories, industries foe heating and boiling of fluids. The mechanism of heat transfer in the electric kettle equipment is transferred into the liquid by firstly the metal conducting heat probably from electric source in contact by conduction and transfer the heat in the liquid causing the molecules of the liquid to expand colliding with one another exerting pressure and at equal prevailing atmospheric pressure which the under boils.
TABLE OF CONTENT
Aim, of the project
Scope of the study
2.0 Literature Review
2.1 Theory of heat
2.2 Theory of heat transfer
3.0 Simultaneous mass & heat
4.0 Heat Exchanger
5.0 Electric heart king
6.0 Open type exchanger
7.0 Direct & indirect heating
8.0 Vaporization
8.1 Condensation
9.0 Heat of vaporization (Enthalpy)
9.1 Design of heating element
CHAPTER THREE
3.0 Material selection
3.1 Properties of material
3.2 Economic consideration
3.3 Chemical properties
3.4 Physical properties
3.5 Component and parts of materials
Uses and their source
CHAPTER FOUR
4.0 Construction procedure
4.0 Marking out
4.2 Cutting operation
4.3 Assembling process
4.4 Maintenance of electric Kettle
4.5 Costing of electric kettle
4.6 Finish touches / surface work
4.7 Precaution taken.
CHAPTER FIVE
5.0 Discussion
5.1 Recommendation
5.2 Conclusion
5.3 Reference
Terms of Use: This is an academic paper. Students should NOT copy our materials word to word, as we DO NOT encourage Plagiarism. Only use as a guide in developing your original research work. Thanks.
Disclaimer: All undertaking works, records, and reports posted on this website, eprojectguide.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not duplicate the work in exactly the same words (verbatim). eprojectguide.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, course hero, and numerous different stages where clients transfer works. The paid membership on eprojectguide.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348064699975 or send us a mail along with the web address linked to the work, to eprojectguide@gmail.com. We will answer to and honor each solicitation. Kindly note notification it might take up to 24 – 48 hours to handle your solicitation.