ABSTRACT
The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The construction was carried out in order to analyze the sizes of particles. The component parts of the set of sieve and their dimensions are as follows:
Height of sieve – 300mm
No of sieve – 4
Diameter of sieve – 300mm
Shape of sieve – Circular
Height of sieve set – 900mm
Mesh/hole sizes – top – 6.0mm, 2nd – 5.0mm 3rd – 3.0mm, bottom 1.0mm respectively.
In construction of sieve compartment, some factors were taken into consideration and they are:
– The capacity of the sieve
– The type of material to be used for constructing sieve
– The availability of the material
– The type of mixture that can be filtered in it
– Cost which is the determinant factor in fabrication of any equipment.
These factors listed helped greatly in completion of this project.
At the end of the fabrication, a sieve equipment was constructed with specified dimensions.
TABLE OF CONTENTS
CHAPTER ONE: INTRODUCTION
1.1 Background of Study
1.2 Statement of Problem
1.3 Purpose/Aims/Objective of the Study
1.4 Scope and Limitation of the Study
1.5 Method of Research
1.6 Significance of the Study
CHAPTER TWO: LITERATURE REVIEW
2.1History of Sieve
2.2 Theory of Sieve
2.3 Definition of Sieve
2.4 Types of Sieve
CHAPTER THREE
METHODOLOGY
CHAPTER FOUR
4.0 RESULT/ANALYSIS
4.1 Material Balance on Sieve
4.2 Screen Analysis
CHAPTER FIVE
Discussion
CONCLUSION AND RECOMMENDATION
REFERENCE
Terms of Use: This is an academic paper. Students should NOT copy our materials word to word, as we DO NOT encourage Plagiarism. Only use as a guide in developing your original research work. Thanks.
Disclaimer: All undertaking works, records, and reports posted on this website, eprojectguide.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not duplicate the work in exactly the same words (verbatim). eprojectguide.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, course hero, and numerous different stages where clients transfer works. The paid membership on eprojectguide.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348064699975 or send us a mail along with the web address linked to the work, to eprojectguide@gmail.com. We will answer to and honor each solicitation. Kindly note notification it might take up to 24 – 48 hours to handle your solicitation.