The Automatic pump control with water-level monitor and digital display is an electrical system constructed for convenient and adequate control of water into overhead tanks (OHT). The device switches “ON” automatically when the water level falls below a certain level and automatically switches “OF” when help tank is filled up. This control function is however through the help of the widely available CD4066, bilateral switches CMOS IC to indicate the water level through the 7 segments display unit. The design ensures a reliable and efficient means of water control, a practical conservation of water and a high speed operation with the help of the electrical motor. It eliminates problems of water overflow by application in both domestic and industrial settings.
List of table
Table 5.1: Result Analysis
Table 5.2: Bill of Engineering measurement and Evaluation
List of figures
Fig 3.1: Schematic diagram
Fig 3.2: Battery symbol
Fig 3.3: Bilateral switch CMOS IC
Fig 3.4: Seven segment display system
Fig .5: Forward and reverse bias of diodes with its equivalent
Fig 3.6: Switch symbol
Fig 3.7: Symbol of Resistor
Fig 3.1: Schematic Resistor
Fig 4.1: Block Diagram of water level controller
Fig 5.1: Representing result analysis in histogram
Fig 5.2: Input voltage wave form
Fig 5.3: Output voltage wave
Title page
Certification page
Dedication
Acknowledgement
Abstract
List of tables/figures
Table of contents
CHAPTER ONE: INTRODUCTION
Thesis Layout
CHAPTER TWO: LITERATURE REVIEW
CHAPTER THREE: MATERIALS AND METHODS
3.1 Materials
3.2 Methods
CHAPTER FOUR: SYSTEM OPERATION
4.1 The power supply unit
4.2 The control unit
4.3 The sensory unit
4.4 The display unit
4.5 The pump-motor unit
CHAPTER FIVE: RESULT ANALYSIS AND DISCUSSIONS
5.1 Water level
5.2 Connection test
5.3 Continuity est
5.4 Signal generation
5.5 Workability test
CHAPTER SIX: CONCLUSION AND RECOMMENDATIONS
6.1 Conclusion
6.2 Recommendation
6.3 Problems encountered
REFERENCES
Terms of Use: This is an academic paper. Students should NOT copy our materials word to word, as we DO NOT encourage Plagiarism. Only use as a guide in developing your original research work. Thanks.
Disclaimer: All undertaking works, records, and reports posted on this website, eprojectguide.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not duplicate the work in exactly the same words (verbatim). eprojectguide.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, course hero, and numerous different stages where clients transfer works. The paid membership on eprojectguide.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348064699975 or send us a mail along with the web address linked to the work, to eprojectguide@gmail.com. We will answer to and honor each solicitation. Kindly note notification it might take up to 24 – 48 hours to handle your solicitation.