ABSTRACT
This work is aimed at studying activated carbons as supercapacitor electrode materials derived from plant biomass waste materials. The activated carbon raw materials are sourced from coconut shell, pine cone and rice husk plant biomass. The chemical activation route is
employed with KOH as an activating agent. The carbonization temperature used is 800 oC and the carbonization time is varied from 1 h to 5 h. Activated carbon of high surface area and porosity are achieved and their electrodes show a good electrochemical performance presenting them as applicable for supercapacitor electrode materials.
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND
As the global economy constantly continues to rise, the global demand for power and energy sources are synonymously increasing. This raises the consumption of fossil fuels which produces two major related issues; depletion of fossil fuel reserves and environmental greenhouse emission problems which not only pose pollution problems but also climate change issues. These issues have been projected as one of the global urgent and important challenges to be tackled. There is, therefore, a need to develop alternative energy sources that are clean, sustainable, and meet up with the rising global demand. In view of this, a lot of renewable energy sources have been explored but they generally have a commonly associated issue; they are seasonal. Most renewable clean energy sources are highly dependent on the time of day and regional weather conditions. The need for the development of related energy conversion and energy storage devices, therefore, arises in order to take the harnessing of these renewable clean energy sources to their best efficiency. Energy conversion and storage devices showing the greatest potentials currently include; batteries, supercapacitors and fuel cells [1].
1.2 MOTIVATION AND PROBLEM STATEMENT
Supercapacitors are yet to reach their full potential even as energy storage problems persist. Supercapacitors are governed by the same fundamental equations as conventional capacitors, but utilizing higher surface area electrodes and thinner dielectrics to achieve greater capacitances seem to possess the quality for future energy solutions. Fossil-based carbon sources for application as activated carbon materials are limited and non- renewable; biomass-based sources are low-cost high-performance candidates.
1.3 SCOPE AND OBJECTIVE
This work is aimed at studying activated carbon which can serve as the negative electrode material of asymmetric supercapacitors. The activated carbon is sourced from biomass materials of pine cones, rice husks, and coconut shells. The electrochemical and surface area parameters of activated carbon are studied and a comparative study of the different materials is presented with suggested optimization techniques.
Terms of Use: This is an academic paper. Students should NOT copy our materials word to word, as we DO NOT encourage Plagiarism. Only use as a guide in developing your original research work. Thanks.
Disclaimer: All undertaking works, records, and reports posted on this website, eprojectguide.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not duplicate the work in exactly the same words (verbatim). eprojectguide.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, course hero, and numerous different stages where clients transfer works. The paid membership on eprojectguide.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348064699975 or send us a mail along with the web address linked to the work, to eprojectguide@gmail.com. We will answer to and honor each solicitation. Kindly note notification it might take up to 24 – 48 hours to handle your solicitation.